pH Meter Accessories
Cole-Parmer pH electrode sealed single-junction for Beckman meters
"All-in-One" electrodes offer versatility and customization. These electrodes combine the pH reference, pH half-cell, and temperature sensor in one 12mm-diameter electrode body. The seven designs allow you to select between low-maintenance, sealed electrodes or clog-resistant refillable electrodes. Tuff-Tip electrodes feature a semi-domed tip which protects the pH bulb and ensures a quick response in harsh and dirty samples. PBR-style electrodes provide predictable, reliable, and quick responses—no matter what the sample temperature. This design virtually eliminates drift, accuracy problems, and premature performance losses due to temperature. All electrodes include 3-ft cable and BNC connector for pH, except where noted. Beckman Instruments-compatible electrodes feature a 30K temperature compensator with a 3.5mm audio plug for connecting to your meter.
Cole-Parmer BNC-to-Stripped Wire Adapter
Use this female BNC-to-stripped wire end connector to simplify connection and replacement of pH/ORP electrodes with male BNC connections to transmitters and controllers with terminal block connectors.
Oakton by Cole-Parmer Submersible 3' L pH Probe, SJ/ABS; BNC
This submersible electrode operates from 32 to 176>F (0 to 80>C). Submerse it up to the cable and measure pH from 0 to 13.
Oakton by Cole-Parmer Submersible 3' L pH Probe, DJ/ABS/100Ohm RTD; Tinned/BNC
Submersible electrodes operate from 32 to 176°>F (0 to 80°>C). Submerse up to the cable. Measure pH from 0 to 13. Electrodes are potted in a 3 ft L x 1-1/16'' diameter ABS sheath. Ideal for measurements in open containers such as tanks or troughs.
Cole-Parmer Preamplfied pH/orp Electrode Cable, No Atc Element, 25'
Preamplified cables are an ideal way to send high-impedance pH or ORP signals in industrial applications where electrical noise from motors, mixers, and other electrically powered equipment may cause unstable measurements. Order the desired cable length and options along with a power supply adapter (order seperately) and easily hook up to any non-differential industrial pH/ORP electrode with a BNC connector (sold separately). Cables have female BNC connectors on the electrode side and male BNC connectors on the meter side. Order an optional BNC-to-spade lug adapter 05994-90 for connection to meters with terminal strips.
Cole-Parmer Replacement ionic strength adjustors, 5 M NaNO3
Ensure consistent and accurate readings from your ISE with these ionic strength adjustors.
Cole-Parmer Insertion/Submersion pH Probe; SJ/CPVC/100Ohm RTD; Plug/BNC
In-line or submersible electrodes with probe guard operate from 23 to 176>F (-5 to 80>C) and have a PVC housing with a 3/4'' NPT(M) fitting on both ends. Epoxy body withstands pressures to 100 psi. Measure pH from 0 to 14. All electrodes measure 6-3/4''L x 1'' OD, with a 1-3/4'' insertion depth.
Essendant Solo Urban Slim Brief Fits Devices Up to 15 6 Polyester 16 5x2x11 75 Black
Solo Urban Slim Brief Fits Devices Up to 15 6 Polyester 16 5x2x11 75 Black
Chemglass Life Sciences pH Probe, 12 x 225mm
pH Range: 0-12 Electrodes are filled with gel reference electrolyte under a pressure of 2. 5 bar Pressure Range: From vacuum up to a process of maximum 36PSI (2. 5 bar) Temperature Range: Steam sterilization/autoclavable to 266 degreesF (0 to 130 degreesC) In-situ sterilization: Up to 100 cycles under standard conditions Fully autoclavable or in-situ sterializable
Chemglass Life Sciences pH Probe, with VP, 12 x 325mm
pH probe with VP, 12x325mm. • pH Range: 0-12 • Electrodes are filled with gel reference electrolyte under a pressure of 2.5 bar • Pressure Range: From vacuum up to a process of maximum 36PSI (2.5 bar) • Temperature Range: Steam sterilization/autoclavable to 266°F (0 to 130°C) • In-situ sterilization: Up to 100 cycles under standard conditions • Fully autoclavable or in-situ sterializable
METTLER TOLEDO pH Sensor InPro 3250 225/PT1000
The InPro 3250 225/PT1000 is a pre-pressurized, liquid filled, low maintenance pH sensor, combined with a PT1000 temperature sensor, for in-line measurement in demanding applications. The 225 mm version is optimal for medium installation lengths.
